This is a vibrant inflatable water - slide set. It consists of two
parallel slides with colorful edges, which are red, blue, yellow,
and green. At the top of the slides, there are red - colored arch -
like structures with circular holes. Below the slides, there is a
small inflatable platform, perhaps for climbing up. The slides lead
directly into a large, round inflatable pool filled with water,
providing a fun and refreshing place for sliding and splashing.
This set is perfect for outdoor summer activities and is sure to
bring joy to children and families.
Specifications:
| Material | 0.55mm PVC Tarpaulin |
| Size | 25*15*7m or Customize |
| Color | As the picture shown or customized |
| Printing | Drawing printing |
| Package | Strong PVC bag for inflatables, carton for blower |
| Accessories | Blower, repair kit (spare material and glue) |
| Blower | CE:220-240V UL: 110-115V |
| OEM | available |
| Workmanship | Double Stitching |
| Certificates | CE, SGS, EN14960 |
| Set uptime | About 10 mins, depend on the Amusement park size |
| MOQ | 1 Piece |
| Payment | T/T, 30% deposit and 70% balance when shipment |
| Shipment | By sea, by air or by express |
| Warranty | 24 months |
| Application | Outdoor and indoor amusement for kids and adults |
The Quality of Our Product
Reinforcement Belt: Applying double to four - fold stitches, we
ensure the product's firmness and lengthen its service life.
Wind Ring: The metal ring placed at the bottom of the inflatable
product is used for product fixation and to prevent it from
swaying.
Air Outlet: Connected to a high - quality zipper cover, it seals
well post - inflation and is convenient and fast for deflation when
in need.
Blower Pipe: A long PVC blower pipe is furnished to ensure smooth
air - blowing.
Safety Netting: Composed of nylon rope in a certain way, it is
tough enough to protect kids from falling down.
Four - fold Black Reinforced Belt: It is more durable and has a
more long - lasting performance.
Perfect Double Stitching: Strong enough, it can be in use for more
than 4 years.
High - Resolution Digital Printing: It provides clear and vivid -
looking patterns.
Dia. 8mm D - ring: It is more wear - resistant and rust - proof.
FAQ
Q: How to repair when damage?
A:
Step 1: Identify the Damage
Thoroughly inspect the inflatable to locate any tears, punctures,
or leaks.
Step 2: Clean and Dry the Area
Clean the damaged area with mild soap and water to remove dirt or
debris. Allow the area to dry completely before proceeding with the
repair.
Step 3: Patch the Damage
Apply a patch specifically designed for inflatable repairs over the
damaged area. Make sure the patch is slightly larger than the
damaged area to ensure proper coverage. Press the patch firmly onto
the surface, smoothing out any wrinkles or air bubbles.
Step 4: Apply Adhesive
If using a patch that requires adhesive, apply a thin, even layer
of adhesive to both the patch and the inflatable surface. Allow the
adhesive to become tacky before pressing the patch onto the
surface.
Step 5: Allow Time to Cure/Allow the Adhesive to Dry
Once the patch is in place, you'll need to allow the adhesive to
dry completely. This may take several hours, depending on the type
of adhesive you are using. It's important to avoid using the
inflatable until the adhesive is completely dry, as this could
cause the patch to come loose. Wait at least 1 hour before
inflating again.
Step 6: Test the Repair
Once the patch has cured, inflate the inflatable and check for any
signs of leakage. If the repair holds, the inflatable is ready to
be used again.
It's important to use repair materials specifically designed for
inflatables and follow the manufacturer's instructions carefully to
ensure a successful repair. If the damage is extensive or beyond
your ability to repair, consider seeking professional assistance.
-
Q: Accessories included?
A: Free accessories include Storage Bag / Repair Kit / Warning
Label / Custom Logo .
