Inflatable Shark Attack Bounce House

This picture showcases an ocean-themed inflatable playground. It is predominantly blue, with designs around the edges that mimic palm trees. Above the center, there is a massive shark with its mouth wide open, looking very lifelike. The slide is also blue and connects to the shark's mouth, allowing children to "zip" through it. The fence of the playground is decorated with dolphin patterns, adding a bit of whimsy. The bottom is designed to resemble a wavy blue ocean background, giving the feeling of being under the sea. There is also a red staircase in the front for children to climb up and down. The entire scene is brightly colored and perfect for children's play and entertainment.

Specifications:

The inflatable castle has many unique details in many aspects:

I. Material details

1. Fabric:

• High-quality inflatable castles usually use high-strength and environmentally friendly PVC mesh fabric. This fabric has characteristics such as wear resistance, tear resistance, waterproofing, and sun protection, and can maintain a good state in various environments and extend service life.
• The thickness of the fabric is generally between 0.55mm. It not only ensures the sturdiness of the castle but also is not too heavy, making it convenient to carry and install.

2.Sewing process:

• High-frequency thermal bonding process is used for sewing, so that each part is closely connected and air leakage is not easy to occur. The thermal bonding place is flat and smooth, without burrs and thread ends, and will not cause harm to children.
• For some key parts, such as the corners and connections of the castle, reinforcement treatment will be carried out to enhance the overall stability.

II. Design details

1. Modeling design:

• The inflatable castle has a rich variety of shapes, including castles, slides, climbing walls, cartoon animals, etc. Designers will carefully design colorful and vivid shapes according to children's preferences and psychological characteristics to attract children's attention.
• Some high-end inflatable castles will also incorporate interactive elements such as water spraying devices and ball pools to increase the fun and interactivity of playing.

• Safety design:
  • Equipped with multiple safety exits to facilitate children's quick evacuation in case of emergency. The safety exit signs are obvious and easy to identify.
  • The height and slope of the castle are reasonably designed, which not only ensures children's playing experience but also is not too dangerous. The slope of the slide is generally between 30 degrees and 45 degrees, which can not only let children enjoy the fun of sliding but also ensure safety.
  • The climbing wall part will be provided with anti-slip patterns and safety handrails to help children climb better and prevent falls.

III. Usage details

1. Fixing method:

• In order to ensure the stability of the inflatable castle during use, fixed ropes and ground anchors are generally equipped. During installation, firmly tie the fixed rope to the fixed point of the castle, and then insert the ground anchor into the ground so that the castle will not be blown away or moved by the wind.
• For inflatable castles used outdoors, the number of fixed points can be increased according to actual conditions to improve stability.

2. Cleaning and maintenance:

• The cleaning of the inflatable castle is relatively simple. You can use a damp cloth to wipe the stains on the surface. For some stubborn stains, you can use a neutral detergent for cleaning. After cleaning, dry it in time to avoid moisture and bacteria growth.
• Regularly check all parts of the castle. If damage or air leakage is found, repair it in time. When repairing, special glue and patch materials can be used to ensure that the repaired castle is safe and reliable.

In short, the inflatable castle has many details in materials, design and use. These details not only reflect the quality and safety of the product but also provide a happy and safe playing environment for children.

FAQ

Q: How to repair when damage?

A:

Step 1: Identify the Damage

Thoroughly inspect the inflatable to locate any tears, punctures, or leaks.

Step 2: Clean and Dry the Area

Clean the damaged area with mild soap and water to remove dirt or debris. Allow the area to dry completely before proceeding with the repair.

Step 3: Patch the Damage

Apply a patch specifically designed for inflatable repairs over the damaged area. Make sure the patch is slightly larger than the damaged area to ensure proper coverage. Press the patch firmly onto the surface, smoothing out any wrinkles or air bubbles.

Step 4: Apply Adhesive

If using a patch that requires adhesive, apply a thin, even layer of adhesive to both the patch and the inflatable surface. Allow the adhesive to become tacky before pressing the patch onto the surface.

Step 5: Allow Time to Cure/Allow the Adhesive to Dry

Once the patch is in place, you'll need to allow the adhesive to dry completely. This may take several hours, depending on the type of adhesive you are using. It's important to avoid using the inflatable until the adhesive is completely dry, as this could cause the patch to come loose. Wait at least 1 hour before inflating again.

Step 6: Test the Repair

Once the patch has cured, inflate the inflatable and check for any signs of leakage. If the repair holds, the inflatable is ready to be used again.

It's important to use repair materials specifically designed for inflatables and follow the manufacturer's instructions carefully to ensure a successful repair. If the damage is extensive or beyond your ability to repair, consider seeking professional assistance.

-

Q: Accessories included?

A: Free accessories include Storage Bag / Repair Kit / Warning Label / Custom Logo .

Guangzhou Kule Amusement Equipment Co.,Ltd
Kule is an outstanding manufacturer with trademark registration in Guangzhou, China. It has been deeply engaged in the vibrant and innovative inflatable industry for nearly a decade. In 2016, Kule was officially established. Its factory facilities cover an area of approximately 6,000 square meters, which is large in scale and has a reasonable layout. The company integrates three core businesses of research and development, production, and sales. Here, it gathers the best inflatable toy designers in the industry. They are full of ingenuity and endow products with vivid vitality with unlimited creativity. There are also highly skilled sewing workers. Between every stitch and thread, professionalism and concentration are fully demonstrated, laying a solid foundation for product quality. And there are experienced sealing workers. They are meticulous and ensure that every product can be perfectly sealed. Kule always adheres to the corporate core values of "integrity-based, service-oriented, quality first, and achieving win-win results", and under this guidance, it continuously forges ahead and provides customers with the highest quality products and services.
The inflatable products of Kule Company are extremely diverse. The inflatable castle full of joy creates an atmosphere where children seem to be in a dreamy fairy tale world. The exciting inflatable slide brings a thrilling experience. The inflatable water slide allows people to enjoy coolness and passion amid splashing water. The inflatable competitive obstacle course stimulates people's desire to challenge. The fun inflatable games add infinite colors to happy times. The practical and beautiful inflatable tent is an excellent choice for outdoor leisure. The grand and eye-catching inflatable arch adds a solemn atmosphere to various activities. The water floating toys let people play to their hearts' content on the blue waves. There are also the exciting inflatable water slides and the joyous water parks and soft playground. Every product condenses the efforts and wisdom of the people of Kule.
The inflatable products produced by Kule unswervingly adopt the highest quality materials. All materials comply with authoritative certifications such as CE, EN14960, and SGS. Every product undergoes strict waterproof, fire-resistant, cold-resistant, and pressure-resistant tests before leaving the factory to ensure safe and reliable use in various complex environments. Based on perfect design, through an advanced computer automatic cutting system, each piece of material is accurately cut to ensure that each product can present a perfect shape. Whether it is the smoothness of lines or the overall proportion, it can be called a work of art.
Kule has a professional design team. They are talented and full of passion. No matter what your needs, budget and plans are, or if your venue has special requirements, they can design and produce any inflatable product you want according to your specific situation. All you have to do is seize an inspiration and boldly put forward your idea, and the designers of Kule will go all out to complete the rest of the work for you. Kule will always provide fast delivery services for new and old customers to ensure that your products can be delivered to your hands in the shortest time without delaying any of your plans. At the same time, Kule also offers affordable prices, so that while you enjoy high-quality products, you don't need to bear excessive costs. In addition, perfect after-sales service is also a major highlight of Kule. No matter what problems you encounter during use, the professional team of Kule will respond in time and provide you with solutions, so that you have no worries.